FUEL & FLUID MANAGEMENT SYSTEMS

Overview of Flomec

FLOMEC™ Oval Gear Flow Meters measure the flow of clean liquids and are produced in a wide variety of materials and configurations to suit most markets including the food, chemical, cosmetic, ink, pharmaceutical, paint, petroleum and additive industries.

Accuracy; the Flomec oval gear flow meters provide high levels of accuracy and repeatability for a wide range of clean liquids irrespective of viscosity and conductivity.

Reliability; among the many PD flow meter design principals available today, the oval gear still holds a top place both in simplicity and field proven performance. Oval Gear meters are positive displacement flow meters where the passage of liquid causes two oval gears to rotate within a precision engineered measuring chamber and with each rotation a fixed volume of liquid passes through the meter.

Keishi Cut Rotors; available for metering of high viscosity products which can reduce the maximum pressure drop across the meter by approximately 50%.

NMI Approved; for Pulse meters, sizes 25mm to 100mm and are limited to the bulk metering of AdBlue and petroleum based products with a viscosity less than 20cps at 20°C.

FLOMEC SMALL CAPACITY FLOW METERS

Flomec small capacity flow meters provide precise volumetric measurement of small quantities of liquids or low flows found in a broad range of industrial and commercial industries. High resolution allows for precise measurement and are simple to install and wire.

FLOMEC MEDIUM CAPACITY FLOW METERS

Flomec medium capacity flow meters find widespread application in industry to monitor and control liquid flow streams and allow for precise dispensing of small to medium batch runs. The standard option of these meters include modular process connections and quadrature pulse output.

FLOMEC LARGE CAPACITY FLOW METERS

Compact and light weight, Flomec 3” and 4” large capacity flow meters are suited for receipt verification, loading, un-loading and distribution management of fluids The standard option of these meters include modular process connections and quadrature pulse output.

KEISHI CUT ROTORS

The “Keishi Cut” High Viscosity rotors have every alternate gear tooth on the flat sides of the oval gear machined to reduce the maximum pressure drop across the meter by approximately 50%. Used when the viscosity is going to be above 1000cP.

FLOMEC FBT BATTERY POWERED TOTALISER

Simultaneously displays resetable (batch) total and cumulative total in engineering units as programmed by the user. When externally dc powered the instrument will produce an un-scaled or scaleable solid state output pulse which is NPN/PNP selectable.

FLOMEC FEB BATCH CONTROLLER

Provides automatic precise batch control with 1 or 2 stage outputs, displaying batch quantity and status at each stage of the batch process. Batch limiting and no-flow detection are safety features and automatic overrun compensation and dual stage outputs provide for precise batch control.

FLOMEC FRT12 BATTERY POWERED FLOW-RATE TOTALISER

Displays instantaneous flow rate, resetable (batch) total or a cumulative total in engineering units as programmed by the user. When externally powered this instrument will produce an un-scaled or scaleable solid state pulse, 4~20mA and flow alarm outputs.

FLOMEC FRT40 BATTERY POWERED FLOW-RATE TOTALISER

The FRT40 Flow-Rate totaliser is designed for computing & displaying flow rates & totals from flow meters with pulse, sine wave or frequency outputs .Display is a resettable (batch) total, cumulative total and instantaneous flow rate in engineering units as programmed by the user.

V SERIES MECHANICAL REGISTERS

The V series robust mechanical registers with metal housings offer 5 resettable digits and 8 digit accumulative total displays. clearly visible for loading and un-loading sites at petroleum depots, mining, construction and marine facilities.Gear box not included with registers for foreign meters.

MEDIUM CAPACITY CHEMICAL FLOW METERS

Providing precise volumetric flow measurement of a broad range of clean water based products, aggressive chemicals, most fuels, fuel oils and lubricating liquids. Can be used as an economical alternative to a complete 316 stainless steel meter for liquids such as Diesel Exhaust Fluid.

TURBOPULSE - SMALL & LARGE CAPACITY METERS

TM Turbopulse mini and the larger TP Turbopulse turbine series measure flows of low viscosity liquids from 3 to 7,000,000 L/hr in a range of sizes from ¼” to 20” (6mm~500mm).

DUALPULSE - PADDLE WHEEL FLOW METERS

DP490 and DP525 are cost effective stainless steel flow meters for measuring the flow of water, fuels and other low viscosity liquids in pipes sizes 1½”~100” (40~2500mm).

STRAINERS & AIR ELIMINATORS

The modular design of the strainers and optional air eliminator head allow fitment as a stand-alone close coupled strainer only or as a multi-function strainer air eliminator check valve assembly.

MINING

Field service vehicles and workshops provide maintenance to heavy mining vehicles involving lubrication, oils & coolants. Management of the products being used for service ensure nothing is being wasted.

AGRICULTURE

As farmers are facing many challenges these days they require products that are robust and provide accurate results with minimum downtime to ensure their crops and livestock are never in danger.

OIL & GAS

Whether it be offshore or land based these sites are prone to some extreme environments which demand high quality instruments and pumps with necessary approvals such as IECEx and NMI.

CHEMICAL AND PROCESS INDUSTRY

From pharmaceuticals to producing Adblue batching the correct quantities of chemicals is critical. Specialised pumps and meters made from appropriate materials needed to ensure efficient and accurate systems for your business.

CONSTRUCTION EQUIPMENT

Many construction sites need the ability to move and monitor the amount of water and chemicals used in small and large scale projects in a timely and effective manner.

OTHER INDUSTRIES

There are many other industries that have the need for accurate measure of fluid and the needs to transfer them. These include; Printing, Water, Automation, Pulp & Paper plus many more...

GPI G2 STAINLESS STEEL CHEMICAL FLOWMETERS

Duration: 1.38

Author: Flow Meters - GPI Flow Meters Channel

The GPI Stainless Steel Flow Meter line are used with ammonium, plating solutions, fuel products and other chemicals.

THE WORLD'S MOST EFFICIENT AODDP

Duration: 1.58

Author: All-Flo Pump

All-Flo Pump Company's new line of air operated diaphragm pumps raise the bar on efficiency standards across the industry. The new line of innovative, stainless steel and aluminium pumps tolled out in December.

ALL-FLO

Duration:2.13

Author: JSG Industrial Systems

This is the All-Flo A200 diaphragm pump with a quick overview on how the pump works with minimum components.

Please fill in all the Required fields to complete this online enquiry and we will get back to you within 1 business day.