These single-shot systems use a manually actuated pump, for applications where fixed outputs of lubrication is required at infrequent intervals. Manual or single-shot pumps use meter units to apportion the amount of oil at each lubrication point.

When the frequency and the amount of oil become more critical this style of system is used. By being able to vary the time intervals and oil output these systems become more versatile in their applications Automatic Cyclic pumps use meter units to apportion the amount of oil at each point.

Designed to suit continuous feeding operations for computer controlled machines or large lubrication requirements. These systems are commonly used on equipment with a high number of lubrication points.

The Ishan distributor block is available in three styles, DV Distributor Block ~ individually adjustable at each outlet, DB Distributor Block ~ single junction design with flow control via flow ratios, DE Distributor Block ~ single junction design with flow control via flow ratios.

Flow ratio controllers are generally used in low pressure application and discharge at a steady volume in every outlet. The injection system supplies lubricant at a steady flow rate in cycles. This system is recommended when applying lubricant at a higher requirement level.

The Ishan positive Displacement system includes the DX and DT series Injectors and YET/YA series Pumps and are used in systems that have a higher lubrication requirement. The Ishan injectors lubricate at a steady flow rate in every cycle.